How to Lay Artificial Grass on Your Own?

How to Lay Artificial Grass on Your Own?
If you are thinking of laying artificial grass in your lawn or garden, then you might as well get started today. You will see how easy it can be and how quickly all the materials can be put together and used. There is no point in taking your time; the entire process should be done in no more than a couple of days. The following are simple tips on how to lay artificial grass the right way.

Artificial Grass on Dirt: In most instances, clearing the ground is the time-consuming part of the process. However, it is not some kind of a bad job either. In fact, it may be fun and pretty rewarding to clear the existing turf in your yard and watch as the job begins to take form.

The first step in how to lay artificial grass involves a trip to your local home improvement store. Once you have chosen the type of turf you want, you will be able to determine the proper measurements for the area where you plan to place it. To start, you will need to break up the turf into equal parts. This will ensure that each piece of sand has the same amount of space to spread into when it is filled with grass.

How to Lay Artificial Grass on Your Own? Garden & Garden Design

How to Specs & How to Shops Near me & How to Prices

Once you have the proper amount of sand, you are ready to start laying. You will need two small tools to help you accomplish this task. The first tool you will need is fiberglass blade that can be purchased at almost any home improvement store. You should have around four inches of sand to start. Now, you can use a garden hose to spray the sand in the areas that you have marked on the turf cutter.

When learning how to lay artificial grass on your own, you will need to use a pumice stone to break up the sand. This helps the particles of turf become smaller so they can easier be pushed into the right areas. The best time for this step is late afternoon or early evening. This is when temperatures are cooler and the grass is not growing as fast.

The next step in how to lay artificial grass on your own is using the pumice stone again to help push the sand deeper into the ground. Then, you will want to spread a layer of jointing tape over the top of the sand. Be sure that the jointing tape is waterproof. You will then want to apply another layer of sand over the first one. Be sure to have a helper to help you make the jointing tape.

The last step in learning how to lay artificial grass on your own is to remove the second layer of sand. You will then need to set up a tarp over the grass so that it does not dry out. Put some water on the tarp to help it stay damp. Lay the turf down evenly on the ground. Now, using the rubber hammer, tap the backside of the sod firmly and start to roll it away from where you want it to go. As you work it, you will notice that some of the grass will fall off.

Learning how to lay artificial grass is not difficult but you will need to have patience. If you are new to the hobby of lawn care, laying turf can take a bit of time. But, once you learn all the steps, you should have no problem getting the job done and enjoying your own personal lawn

] }
No comment